Tip Toe Bunk Bed Setup: Quick Guide

By Newton Baby: #1 Rated Baby Crib Mattress | Published: 2026-10-21

Category: How-to Guides

Set up your Tip Toe bunk bed and Kids' Twin Mattress bundle with confidence. This guide covers assembly steps, common mistakes, and safety checks.

Quick Answer

Assemble the Tip Toe bunk bed frame first, then add the Kids' Twin Mattresses. Use the reversible ladder on either side and check all bolts are tight before letting kids use the bed.

Why Setup Order Matters

The Tip Toe bunk bed's convertible design lets you stack the beds or separate them into two standalone twin beds. The order you assemble the frame affects how easily you can adjust the configuration later. Start with the main frame parts and use the reversible ladder on the side that fits your room layout best.

Choosing the Right Mattress

The Kids' Twin Mattress in this bundle is designed to fit the Tip Toe frame snugly. Using a mattress that is too thick or too thin can create gaps or make the guardrails less effective. Always check that the mattress sits flush against the frame sides.

Step-by-Step Setup

1. Unpack and Inventory: Lay out all parts and hardware for the Tip Toe bunk bed and both Kids' Twin Mattresses. Check that you have the reversible ladder, guardrails, and all bolts. Missing hardware? Contact support before starting assembly.
2. Assemble the Main Frame: Follow the frame instructions to connect the side rails and end panels. Tighten all bolts by hand first, then use the tool to fully secure them. Do not over-torque. Loose bolts are a common cause of wobble. Double-check each joint.
3. Attach the Reversible Ladder: Decide which side of the bed the ladder will go on. Attach it to the frame using the supplied brackets. Ensure it is level and secure before moving on. If the ladder feels unstable, re-check the bracket alignment. Do not let children climb until it is solid.
4. Install Guardrails: Attach the guardrails to the top bunk sides. Make sure they are flush with the mattress surface and that there are no gaps large enough for a child's head or body to pass through. A gap of more than 3 inches is a safety risk. Adjust or contact support if needed.
5. Place the Mattresses: Put one Kids' Twin Mattress on each bunk. Ensure the mattresses sit flat and do not extend beyond the frame edges. The bottom mattress should also fit snugly against the frame. If the mattress shifts easily, check that the frame is level and the mattress is correctly sized.
6. Final Safety Check: Inspect all bolts, the ladder, guardrails, and mattress fit. Shake the frame gently to test stability. Verify that the ladder is securely attached and that the guardrails are at the correct height. Perform this check weekly, especially if the bed is used daily.

Product Facts

Tip Toe Bunk Bed & Kids' Twin Mattress Bundle: This bundle pairs the versatile TipToe Bunk Bed with two Kids' Twin Mattresses—everything you need for a fully functional, stylish sleep space that grows with your kids. You get the bed and mattress together, so you don't have to guess if a third-party mattress will fit the frame correctly.
Tip Toe Bunk Bed & Kids' Twin Mattress Bundle