What the Peggy conversion actually includes
The Peggy 3-in-1 Convertible Crib from Babyletto ships with a toddler bed conversion kit, so you do not need to buy a separate rail set to move from crib to toddler bed. The same crib also converts to a daybed and, with the appropriate kit, to a full-size bed. This guide focuses on the toddler-bed stage because that is the first conversion most families tackle.
The crib is suitable from newborn up to 4 years old, or up to 50 lbs. Those limits matter for timing: the toddler-bed stage is part of the crib’s intended lifespan, not an add-on you need to rush toward or delay indefinitely.
Peggy crib details that shape the conversion
- Peggy Convertible Crib: 3-in-1 convertibility: crib to toddler bed to daybed, with a toddler bed conversion kit included. You can plan the toddler-bed switch without sourcing an extra conversion rail.

Peggy Convertible Crib - Peggy Convertible Crib: Suitable from newborn up to 4 years old, or up to 50 lbs. This is the crib’s stated use range; use it alongside your child’s development, not as a strict deadline.
- Peggy Convertible Crib: Four adjustable mattress positions: 27.02”, 24.15”, 21.27”, and 18.4”. Lowering the mattress as your child learns to sit and stand is part of safe crib use before and during the transition.
- Peggy Convertible Crib: Standard-size crib with universal mattress fit; pairs with any Newton standard-size crib mattress. You can keep your existing standard crib mattress for the toddler-bed stage if it fits properly.
How to convert the Peggy crib to a toddler bed
The supplied product information confirms that the toddler conversion kit is included and that assembly instructions are available from the product page. The exact sequence for removing the crib side and attaching the toddler rail is covered in those instructions; follow them rather than improvising. The steps below are the planning and checkpoint steps you can take around that official guidance.
- 1. Confirm you are ready for the toddler-bed stage: The Peggy is intended for use up to 4 years old or 50 lbs. Many families convert when a child begins climbing or trying to get out of the crib, but that is a general parenting judgment, not a manufacturer rule in the supplied information. If your child is still comfortably and safely using the crib, there is no supplied requirement to convert at a specific age.
- 2. Locate the included toddler bed conversion kit: The kit is included in the shipment. Check that all pieces are present before you start, and keep the assembly instructions from the product page on hand.
- 3. Lower the mattress to the lowest position before converting: The Peggy has four mattress positions. The lowest is 18.4”. Lowering the mattress is part of preparing for a child who can sit and stand, and it keeps the sleep surface low as you move to the toddler-bed configuration.
- 4. Remove the crib side and attach the toddler rail: Follow the supplied assembly instructions for the exact hardware and order. The Peggy uses hidden-hardware construction, so visible screws are eliminated on the furniture exterior; do not drill new holes or substitute hardware.
- 5. Check the mattress fit: The Peggy is a standard-size crib with universal mattress fit and is designed to work with any standard-size crib mattress. A Newton standard-size crib mattress is a confirmed match. After conversion, the mattress should sit flat and secure within the frame with no gaps that could trap a child.
- 6. Do a final stability check: Push gently on the frame and rail to confirm everything is tight. Recheck the hardware after the first few nights, since children move a lot in a new bed configuration.
When to convert: use the crib’s limits, not a calendar
The Peggy’s supplied range is newborn to 4 years old, or up to 50 lbs. That gives you a broad window. The right moment depends on your child’s behavior and your nursery setup, not on a fixed birthday. If your child is climbing out of the crib or appears uncomfortable with the crib sides, that is a common signal to consider the toddler-bed stage. If your child is still sleeping well and safely in the crib, you can use the crib configuration within the stated limits.
One practical checkpoint: the Peggy has four mattress heights, and the lowest position is 18.4”. If you have not already lowered the mattress as your child learned to sit and stand, do that before or during the conversion. The toddler rail is not a substitute for the correct mattress height.
Mattress fit after the switch
The Peggy is designed for a standard-size crib mattress, and the supplied information confirms it pairs with any Newton standard-size crib mattress. You do not need a special toddler mattress for this conversion. Keep using the same standard crib mattress if it is in good condition and fits snugly.
After you attach the toddler rail, check the mattress edges. A proper fit means the mattress does not slide easily and there are no gaps between the mattress and the crib frame. If you are switching from a different mattress or adding a new one, test the fit before your child sleeps in the bed.
Materials and care that matter for the toddler years
- Peggy Convertible Crib: Made with solid New Zealand pine wood; end panels are acacia veneered TSCA compliant engineered wood. Knowing the materials helps you clean appropriately and understand what you are maintaining.
- Peggy Convertible Crib: Care: wash with warm water and mild soap, wipe dry after washing. Toddler beds see spills and sticky hands; this is the supplied cleaning method.
- Peggy Convertible Crib: GREENGUARD Gold Certified and tested for over 10,000 chemical emissions and VOCs. This is a supplied indoor-air certification relevant to a child’s sleep environment.
- Peggy Convertible Crib: Finished in a non-toxic, multi-step painting and staining process that is lead and phthalate safe and exceeds ASTM International and U.S. CPSC safety standards. If the finish chips, Babyletto can provide touch-up pens; the supplied information notes these are GREENGUARD approved for cosmetic imperfections.
Safety checkpoints supported by the Peggy’s details
These checkpoints come from the crib’s supplied specifications and care information. They are not a substitute for the assembly instructions.
- Use the lowest mattress position for the toddler stage: The four positions range from 27.02” down to 18.4”. The lowest position is the appropriate starting point once your child can sit and stand.
- Keep the toddler rail securely attached: The included toddler bed conversion kit is designed for this crib. Use the supplied hardware and check tightness regularly.
- Confirm standard mattress fit: The Peggy is a standard-size crib with universal mattress fit. A Newton standard-size crib mattress is a confirmed pairing. Avoid any mattress that leaves gaps.
- Respect the weight and age range: The crib is intended for newborn to 4 years old, or up to 50 lbs. Do not use it beyond those limits.
- Clean with mild soap and water only: Wipe dry after washing. Do not use harsh chemicals that could damage the finish or leave residue near your child.
What to do with the crib parts you remove
The Peggy converts to a daybed and, with the appropriate kit, to a full-size bed later. Keep the crib side and any hardware you remove in a labeled bag or box. The supplied information does not specify a storage method, but keeping the parts together makes future conversions or resale easier. If you plan to move to a full-size bed, note that the full-size conversion kit is separate from the included toddler kit.


