Start with the room, not the tools
Before you open the boxes, decide where the TipToe will live. The assembled footprint is 81.5"L x 43"W x 67.5"H, so measure the wall space and check ceiling height before assembly day. The bed ships in two boxes, so clear a path for delivery and keep the cartons until you have checked every part.
The TipToe converts from a bunk into two individual twin beds, which means you can assemble it in the configuration that suits your room now and split it later. If you plan to separate the beds eventually, leave enough floor space around the frame for two standalone twin beds rather than pushing it into a tight corner.
TipToe dimensions that affect placement
- TipToe Bunk Bed: Assembled dimensions are 81.5"L x 43"W x 67.5"H. Use these measurements to confirm the bed fits your room and leaves clearance for the ladder and everyday movement.

TipToe Bunk Bed - TipToe Bunk Bed: The bed supports up to 400 lbs total, with 250 lbs on the bottom platform and 200 lbs on the top. These limits tell you which sleepers the bunk is designed for and help you plan the top-versus-bottom arrangement.
- TipToe Bunk Bed: Ships in two boxes with shipping dimensions of 47"L x 44"W x 10"H. Knowing the box size helps you decide where to stage the parts and whether you need a second person for carrying.
A practical assembly sequence
- Unpack and check the parts: Open both boxes, lay out the panels and hardware, and compare the contents with the instructions manual. The TipToe uses hidden hardware, so keep the screws and bolts organized as you unpack.
- Build the lower frame first: Assemble the bottom bed on a clear, soft surface to protect the finish. The slat mattress support is part of the frame, so confirm the slats are seated before you add the upper section.
- Add the upper section and ladder: Follow the manual to attach the upper rails and the integrated ladder. The ladder can be placed on either side, so choose the side that matches your room layout before tightening the final connections.
- Check stability and hardware: Once assembled, press gently on the frame and check that all connections are secure. The hidden hardware design eliminates visible screws on the exterior, but you should still confirm every fastener is tight.
Choose a mattress that fits the frame
The TipToe fits any standard twin mattress up to 6" thick, with no box spring required. That thickness limit matters for the top bunk: a deeper mattress can sit above the guardrail and reduce the effective barrier. The supplied details pair the TipToe with the Newton Kids' Twin Mattress, which is a straightforward starting point if you want a mattress that is intended for this bed.
If you already own twin mattresses, measure their thickness before you assemble. A mattress that is too deep may not sit properly inside the frame, and the slat support is designed to hold the mattress directly, not a box spring.
Mattress fit at a glance
- TipToe Bunk Bed: Fits any mattress up to 6" thick, no box spring required, slat mattress support. This is the key compatibility check before you buy or reuse a twin mattress for the TipToe.
- TipToe Bunk Bed: Pairs perfectly with the Newton Kids' Twin Mattress. If you want a mattress that is explicitly matched to the bed, this is the supplied pairing.
Place the ladder where it works for your room
The integrated ladder can be placed on either side of the TipToe, which is useful when the bed sits against a wall or shares a room with other furniture. Put the ladder on the side with clear floor space and a stable landing area, and avoid positioning it where a door, dresser, or toy bin could block the bottom rung.
Because the ladder is part of the bed frame, check that it is firmly attached after assembly. If you later convert the bunk into two twin beds, the ladder is no longer needed, and the hidden hardware design keeps the exterior clean when the bed is used as a standalone twin.
First-night safety checkpoints
- Confirm the mattress is no thicker than 6": A thicker mattress can sit too high in the frame, so measure before making the bed.
- Check the ladder side: Make sure the ladder is on the side you chose and that the path to it is clear.
- Review the weight limits: The top bunk supports up to 200 lbs and the bottom up to 250 lbs, so assign sleepers accordingly.
- Keep the floor clear: Remove toys, cords, and clutter from the area around the ladder and the bed frame.
- Walk through the bedtime routine: Show your child how to climb the ladder, where to sit, and how to get out of bed safely in the dark.
What the supplied details do not confirm
The supplied information does not include a specific age recommendation for the top bunk, a maximum user height, or detailed assembly torque values. It also does not confirm whether the ladder can be repositioned after the bed is fully assembled, so decide on the ladder side before you tighten everything down.
For care, the supplied instructions say to wash with warm water and mild soap, then wipe after washing. That is useful for everyday cleaning, but it does not cover every finish or stain, so test any cleaning method on a small hidden area first.
Certification and care details
- TipToe Bunk Bed: GREENGUARD Gold Certified and made with sustainably sourced solid New Zealand pine wood and TSCA compliant engineered wood, with an Araucaria hardwood ladder. These material and certification details are part of the product's supplied profile if indoor air quality and wood sourcing are priorities for your family.
- TipToe Bunk Bed: Wash with warm water and mild soap, wipe after washing. This is the supplied care instruction for cleaning the bed frame.


