Back to Blog
How-to Guides 2026-11-13 Newton Baby: #1 Rated Baby Crib Mattress 0 views

Newton Nest Convertible Crib Setup: Newborn to Toddler

Newton Nest Convertible Crib Setup: Newborn to Toddler

Follow the Nest 4-in-1 Convertible Crib from bassinet to junior bed, with assembly checkpoints, mattress-height changes, and the liner and mattress care that keep each stage ready.

Start with the stage, not the age

The Newton Nest 4-in-1 Convertible Crib changes shape four times: bassinet, full-size crib, toddler bed, and junior bed. Treat each change as its own small setup job rather than one long conversion. The bassinet is intended for babies 0–6 months or up to 20 lbs, whichever comes first, and also ends when your baby shows signs of rolling over or pushing up on hands and knees. That means the first conversion may arrive earlier than the calendar suggests.

The crib stage, by contrast, is built around three mattress heights and is intended for babies and toddlers up to three years old. The toddler bed is for 18 months to 5 years, and the junior bed for 3 to 5 years. Use those ranges as guardrails, but watch your child’s movement and climbing attempts before you remove any side panel.

Bassinet assembly: four corners, a liner, and optional wheels

The bassinet is the only stage that ships with its own sleep surface: a Nest Bassinet Mattress and a mesh liner are included. Setup is deliberately short because the frame is small.

  1. Connect the four corner pieces: Attach the corners using the supplied bolts and Allen wrench. The bassinet’s assembled dimensions are 30.1” x 22.2” x 31.5”, so check that the footprint fits beside your bed or in the room where you plan to use it.
  2. Add the mesh liner: The liner is the bassinet’s protective barrier, keeping arms and legs safely inside. Fit it to the frame before you add the mattress.
  3. Attach the locking wheels if you want portability: The wheels are optional. They let you roll the bassinet from room to room, and the smooth-glide design can also rock back and forth. If you prefer a fixed position, leave them off.
  4. Use only Nest bassinet accessories: Bassinet mode is only compatible with Nest Bassinet accessories. The Extra Bassinet Sheets and Extra Bassinet Mattress Covers are not compatible with this mode, so plan laundry around the included liner and mattress rather than adding those extras.

What the bassinet stage includes

  • Newton Nest Convertible Crib: Includes full Nest Bassinet Liner, Nest Bassinet Mattress, and Nest Bassinet. You do not need to buy a separate bassinet pad or liner to start using the Nest in bassinet mode.
    Newton Nest Convertible Crib
    Newton Nest Convertible Crib
  • Newton Nest Convertible Crib: Bassinet for babies 0-6 mos (or up to 20lbs). This is the first transition checkpoint: the bassinet stage ends at about six months, 20 lbs, or signs of rolling and pushing up, whichever comes first.
  • Newton Nest Convertible Crib: It’s the only fully convertible crib with a protective mesh liner for the bassinet mode to keep arms and legs safe. The liner is part of the bassinet’s safe setup, not a decorative extra, so it should be fitted whenever the bassinet is in use.

From bassinet to full crib: remove, then rebuild

When your baby outgrows the bassinet, the conversion to crib mode is mostly disassembly. Fully remove the bassinet liner and mattress, then remove the wheels. Press the cam locks into the corner pieces. The crib stage uses a full-size crib frame, and the supplied bassinet mattress is not the crib mattress, so pair the crib with a Newton breathable crib mattress.

The Nest crib has three mattress height positions: newborn at 15.5”, infant at 20.75”, and toddler at 26.15” from the top rail to the top of the platform. Lowering the mattress is a matter of choosing the next height setting and adding the brackets. The low side height is intended to make it easier to get babies in and out, especially during middle-of-the-night wakeups, but the trade-off is that you will still need to bend when the mattress is at its lowest.

How to lower the crib mattress height

The Nest does not use a hidden release you have to hunt for. The height change is a bracket-and-setting job, and the three positions are labeled by stage.

  • Newborn — 15.5”: Use the highest setting when your baby is not yet sitting or pulling up. This is the easiest height for lifting a newborn in and out.
  • Infant — 20.75”: Move down to the middle setting as your baby grows and becomes more mobile. The exact timing depends on your child’s movement, not a fixed month.
  • Toddler — 26.15”: The lowest setting is intended for the toddler stage, up to three years old in crib mode. Lowering the platform gives more distance between the top rail and the mattress surface.

Toddler bed conversion: remove one side panel

The toddler bed stage is for 18 months to 5 years. To convert, remove the front long side panel. The low, open side gives toddlers the freedom to climb in and out while keeping the bed low to the ground. The Nest’s low side height is a deliberate part of this stage, but it also means the bed is not enclosed on that side, so the surrounding floor space should be clear.

If you are moving from crib mode, you will also remove the bassinet-era parts that are no longer in use. The toddler bed uses the same frame and mattress platform, just with one side opened up.

Junior bed conversion: remove the second side

When your child is between three and five years old, remove the back long side panel as well. That turns the Nest into a junior bed: a low, open platform that looks like a real bed without the full-size commitment. The junior bed is intended for children 3 to 5 years old, and the low height is meant to support independent sleepers who are ready for their own space.

The Nest is described as a 4-in-1 crib that grows with your child from newborn to 5 years. The junior bed is the final stage in that progression, not a separate purchase.

Crib and conversion details that affect setup

  • Newton Nest Convertible Crib: Three mattress height options make it easier on your back (no deep bending!). The height settings are a back-saving feature, but they still require you to choose the right stage for your child’s mobility.
  • Newton Nest Convertible Crib: Simply remove one side panel to create a toddler bed (for 18 months to 5 years). The toddler conversion is a single-panel removal, not a full rebuild.
  • Newton Nest Convertible Crib: Remove both side panels for children 3 years to 5 years. The junior bed stage depends on removing the second long side panel, so plan for the floor space that opens up.

Cleaning the liner and mattress between stages

The bassinet liner is machine washable: remove it from the frame, machine wash cold on gentle cycle, then tumble dry low. Do not bleach or dry clean it. For the Wovenaire mattress, unzip and remove the cover to wash it. If the core itself needs cleaning, place it in a bathtub or shower and wash with mild soap, shake it against a hard surface to remove most of the water, and leave it out to air dry.

For the wood frame, wipe as needed with a lint-free microfiber cloth and a non-toxic cleaner, then wipe dry immediately. Avoid abrasive chemicals and materials, which can scratch the finish. Direct sunlight may affect the color over time, so keep that in mind if the crib sits near a window.

What to check before each conversion

Before you move from bassinet to crib, confirm your baby has reached one of the bassinet limits: about six months, 20 lbs, or signs of rolling over or pushing up on hands and knees. Before the toddler conversion, check that your child is at least 18 months and is climbing in and out safely. Before the junior bed, confirm the 3-to-5-year range and that the room is clear around the open sides.

The Nest is GREENGUARD Gold certified and made from sustainably sourced beech wood and rubberwood with a non-toxic finish. Those material details do not change with the stage, but they are worth knowing when you clean the frame or hand the crib down to another child.

Related Articles

Customer Service
Home
Products
Cart
Profile